Profi Care PC-HSM Manual De Instrucciones página 21

Adjust Cutting Length
The cutting length comb can only be adjusted if the appliance is switched off.
1. Attach the cutting length comb.
2. Set the desired cutting length:
• Increasing the cutting length? Turn the wheel (3) in the direction of the blade.
• Decreasing the cutting length? Turn the wheel (3) in the direction of the charger
socket.
- You can read the setting from the display (7).
Cut Hair and Beard
1. Select the cutting length.
2. Switch the appliance on. I can be seen on the switch (6) and the indicator lamp
lights up green.
Outlining and Shaving the Neck
The shaving head allows precise outlining the shape of the beard, even in difficult to
reach places as well as a clean shaving of the hairline at the neck.
1. Turn the appliance off with the switch (6).
2. Remove the cutting length comb (1) and turn the hair clipper on again.
Thinning Function
1. Slide the button (2) towards
which meet the blade first are cut.
2. Slide the button towards
End of Operation
Switch off the appliance. 0 can be seen on the switch (6).
PC-HSMR3052NE_IM_new2
. The blade is partly covered. Only the hairs
to turn off the function.
21
16.11.22