1. Remove the transparent protection cap.
2. Slide the switch towards OFF in order to turn on the appliance.
• When the switch snaps audibly into place, the appliance works continuously.
• If you release the switch before it snaps audibly into place, the appliance will
switch off again.
3. Guide the tip of the shaving head into the nostril or auricle.
4. Slide the switch back towards ON after usage in order to switch off the appliance.
5. Clean the shaving head with the cleaning brush after usage.
6. Put the transparent protection cap back on.
CAUTION:
• Do not immerse the appliance in water! The electronic components can be
damaged.
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
1. Switch off the appliance before cleaning.
2. Remove the battery from the battery compartment.
3. Loosen the shaving head by turning it anticlockwise and remove it.
4. Remove remaining hair from the blade holder using the cleaning brush. You can
also blow off the remaining hair from the holder.
5. Place the shaving head onto the blade holder again. Turn it tight clockwise until it
snaps audibly into place.
6. Put the transparent protection cap back on.
PC-HSMR3052NE_IM_new2
Using the Appliance
Cleaning
25
16.11.22