Operation (continued)
Fast cooling
FILTER
QUIET
□ Press the Quiet button to set or cancel the Quiet Mode operation.
NOTE:
□
It takes about 2 to 3 minutes to fully enter the quiet mode.
□
Sometimes it cannot enter the quiet mode because of some protection.
SUPER
The SUPER button is used to start or stop fast cooling.
□ Press the SUPER button. The air conditioner automatically sets the
fan speed to High and the temperature to 16°C.
□ To turn off Super control, press MODE, FAN, QUIET or SUPER button on
the remote control.
In the SUPER mode, you can set the timer.
NOTE:
FILTER
□ When the Filter indicator light is lit, remove, clean and replace the air filter. See "Cleaning the Air
Filter".
□ Press Power button on the machine or FILTER button on remote to reset the filter after cleaning and
replacing the air filter.
When the light is on, it will remain on for 180
NOTE:
hours or until you press Clean Filter button.
DIMMER
□ Press the DIMMER button to turn off the control panel display.
When in DIMMER mode, new control inputs
NOTE:
will return display to normal.
Sleep control cannot be selected in Fan mode.
NOTE:
□ Press FAN to select High, Med or Low.
□ Press the up or down arrow button to set the temperature.
□
Press and hold the DIMMER button on the remote for 5 seconds to switch the DIMMER mode to SLEEP mode.
□
After 10 seconds, the light on the control panel display will dim.
18