Publicidad
Idiomas disponibles
Idiomas disponibles
Pre-Installation (continued)
UNPACK THE AIR CONDITIONER
WARNING: Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
□ Remove and dispose of/recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air
conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
□ Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can
damage the surface of your air conditioner.
□ Handle the air conditioner gently.
□ Remove top rail (HH) from the packaging material (A).
LOCATION REQUIREMENTS
Before you Begin
Read these instructions completely and carefully.
IMPORTANT:
□ Save these instructions for local inspector's use.
□ Observe all governing codes and ordinances.
NOTE: Installer, be sure to leave these instructions with
the Consumer.
NOTE: Consumer, keep these instructions for future
reference.
□ Skill level: Installation of this appliance requires basic mechanical skills.
□ Completion time: Approximately 1 hour.
□ We recommend that two people install this product.
A
(8K/10K BTU models)
7
HH
Publicidad
