Kicker PXA Serie Manual Del Propietário página 22

2
1
1
Input Gain Controls
2
Crossover, Fader & Input Level Switches
Input Gain Controls: The input
gain control is not a volume
control. It matches the output of
the source unit to the input level
of the amplifier. Maximum power
out of the amplifier is possible with
the gain in the lowest position.
Incorrectly setting the gain can result
in distorted output or damage to, and
premature failure of, your speakers. For
a quick setup, turn the source unit up to
about 3/4 volume (if the source unit goes to
30, turn it to 25). Slowly turn up (clockwise)
the gain on the amplifier until you can hear
audible distortion, then turn it down a little.
English 22