Kicker PXA Serie Manual Del Propietário página 25

Never change the switches with the audio system on!
Input Level: Choose whether to receive a
HI or LO-level signal from your source unit.
Fader Switch: Turn the fader switch ON
if you are running two sets of inputs (front
and rear for example) to the amplifier. Leave
the fader switch OFF if you want to drive all
channels from a single stereo input.
HI-PASS: Use the HI-PASS switches
to set the internal crossover. Choose a
cutoff of 80Hz, 120Hz depending on the
configuration of switches. OFF for a full
range signal.
LO-PASS: Use the LO-PASS configuration
when in bridged operation with a subwoofer
to set the internal crossover. This will set the
cutoff to 80Hz. OFF for a full range signal.
English 25