UFESA Aqua Steam Manual De Instrucciones página 19

Regularly clean the ceramic soleplate with a damp, non-metallic washing pad.
Wipe the exterior of the Steam Station with a soft cloth.
Do NOT use abrasive cleaners, detergent or other chemicals to clean the Steam Station.
Descaling process
Proceed as follows:
1. Please prepare a water container.
2. Make sure that the plug of the product has been unplugged.
3. Fill the water tank to the maximum water level (MAX). Note: Do not pour vinegar or other
descaling agents into the water tank.
4. Insert the pump steam station plug into the socket, and the steam control knob has been
adjusted to the first point, wait for the heating indicator light to go out.
5. Hold the iron on top of the water container, press and hold the steam button until no scale
is flushed out from the bottom of the iron.
6. Turn the steam control knob back to the third point, until there is no water and steam rus-
hing out from the bottom of the iron.
7. Unplug the power plug of the iron, and move the iron gently on a cloth to remove the resi-
dual water stains on the soleplate.
8. Pour out the remaining water in the water tank.
9. Let the iron cool down and store it.
TROUBLESHOOTING GUIDE
PROBLEM
The iron has no
steam
The product
makes a loud
pumping sound
Water droplets
from the sole-
plate
Dirty water and
impurities will
emerge from the
soleplate
POSSIBLE REASON
Insufficient water in the
water tank
You didn't press the steam
switch
No water in the water tank
After the descaling process is
over, the remaining water can
drip from the bottom plate
The descaling process has
not been completed
Impurities or chemicals
in the water deposit on
the steam outlet and/or
soleplate
SOLUTION
Fill the water tank to the MAX water level
mark. Press and hold the steam switch until
the steam comes out. It may take 30 seconds
to spray out steam
Tap the steam switch to turn on the steam
function.
Fill the water tank with water and press the
steam switch until the sound of pumping
water becomes smaller and the bottom plate
emits steam
Wipe the bottom plate dry with a cloth. Please
perform the descaling process
(see "Maintenance and Cleaning")
You must perform the descaling process again
(see "Maintenance and Cleaning")
Perform the descaling process regularly
19