10
www.aeg.com
4.6 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the
ECO button.
The fridge temperature is set to +4°C
and the freezer temperature to -18°C.
2. To deactivate the function, press the
ECO button again or select a
different set temperature (refer to
"Temperature regulation").
It is not possible to activate
the ECO function when the
Extra Cool function is on.
The ECOMETER indicator
shows the appliance's
current energy consumption.
Three fully lit bars indicate
the most energy-efficient
setup.
4.7 Extra Cool function
With the Extra Cool function, you may
rapidly cool large amounts of warm food,
for example after doing grocery
shopping, without warming food already
stored in the fridge compartment.
To activate the function, press the Extra
Cool button.
The Extra Cool indicator lights up. The
fan activates automatically for the
function duration.
This function stops automatically. Once
the function is off, the Extra Cool
indicator goes out.
Press the Extra Cool button to deactivate
the Extra Cool function before it
automatically ends.
To set a different fridge
temperature, switch off the
Extra Cool function and refer
to "Temperature regulation".
4.8 Extra Freeze function
Extra Freeze function is used to pre-
freeze and fast freeze in sequence in the
freezer compartment. This function
accelerates the freezing of fresh food
and, at the same time, protects
foodstuffs already stored from
undesirable warming.
To freeze fresh food,
activate the Extra Freeze
function at least 24 hours
before placing the food to
complete pre-freezing.
To activate this function, press the Extra
Freeze button.
The Extra Freeze indicator lights up. The
Extra Freeze function stops automatically
after 52 hours.
Press the Extra Freeze button to
deactivate the Extra Freeze function
before it automatically ends.
4.9 Fan function
The fridge compartment is equipped with
a device that allows rapid cooling of food
and ensures high uniformity of
temperature in the compartment.
This device activates automatically when
needed or manually.
To switch on the function, press the Fan
button. The Fan indicator lights up.
To switch off the function, press again
the Fan button. The Fan indicator goes
out.
If the function is activated
automatically, the Fan
indicator will not light up.
The activation of the Fan
function may increase the
noise and energy
consumption.
The fan stops when the door is opened
and restarts immediately after the door is
closed.
4.10 High temperature alarm
When the temperature in the freezer
compartment increases (for example due
to an earlier power failure), the alarm
indicator flashes, the freezer temperature
indicator shows H° and blinks and the
sound is on.