Descargar Imprimir esta página

Profi Care PC-HSM/R 3051 Manual De Instrucciones página 15

Ocultar thumbs Ver también para PC-HSM/R 3051:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
WARNING of Electric Shock:
• Keep the power supply unit dry.
• Do not use this appliance in close proximity to water if the power supply unit is
connected (e. g. bathtubs, shower basins or other vessels containing water)!
• Do not charge the appliance near bathtubs, shower trays or other vessels
containing water.
• If the appliance does fall into water, first unplug the power supply unit from the
wall socket.
• Charge the appliance in a cool, dry place.
• Do not replace any parts. Do not make any modifications.
WARNING: Risk of Injury!
• Do not press the shaving head of the shaver too hard on the skin.
• Do not use the appliance if the shaving head is damaged.
• Never remove an attachment during operation!
CAUTION:
• Choose the place for charging so that the appliance is not exposed to direct
sunlight or other sources of heat.
• Do not charge the rechargeable battery unattended.
• Always unplug the power supply unit from the wall socket after charging.
• Only trim main or beard hair with the appliance.
• Only cut dry hair with the appliance.
• Start by using the biggest comb attachment and cut your hair / beard step by step
to the desired length.
1. Turn the appliance off. OFF can be seen on the switch (1).
2. Connect the power supply plug with one of the following jacks:
• The socket directly at the bottom end of the appliance.
• Alternatively place the appliance in the charging station. The socket is at the
rear.
PC-HSMR3051_IM_new2
Notes for Use
Charging the Battery
15
27.12.22

Publicidad

loading