Descargar Imprimir esta página

MITARI MBBT Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
1.
Foreword
These usage instructions must be read carefully by each user when first using the device. They make it easier
for the user to get to know the device/hoist and to use it for the correct purposes.
The operating instructions provide important information for the safe, correct and sensible use of the device/
hoist. Your alertness helps to avoid hazards, reduce repair costs and downtime and increase the reliability and
service life of the device/hoist.
Instructions for use must always be available close by when using the equipment. In addition to the operating
instructions and safety regulations applicable in the country of use and place of operation, the recognised
rules for safe and professional work must also be observed.
This equipment is subject to mandatory periodic inspections by an approved inspection
body for hoisting and lifting equipment. As per the EN13155 + A2 standard.
Upon delivery or collection from our warehouses, always check the condition of the
equipment for completeness and possible damage.
2.
Terms of use
The equipment may only be used in accordance with the following provisions. Any misuse and accidents
resulting from such misuse shall be at the expense of the user.
1.
This tool can only be used for the application for which it was designed, i.e. to move Big-Bag spreaders
with four (4) attachment loops in combination with a hoisting device.
2.
It is prohibited to handle loads/materials on carriers and/or auxiliary or hoisting equipment that this
device was not designed for.
3.
The tool is designed to handle only one (1) Big-Bag spreader per movement. It is prohibited to hook up
more than one Big-Bag spreader at a time.
4.
The equipment must NEVER be used for lifting or moving persons.
5.
The nominal lifting capacity (Working Load Limit or WLL) must never be exceeded.
6.
The equipment may never be allowed to become defective or incomplete, nor may any structural
changes be made.
7.
The normal operating temperature is -20 to +60 °C and the equipment may only be used in an explosion-
free environment.
8.
Provide safe storage for the equipment when not in use to avoid damage
3.
Safety instructions
General safety instructions
1.
The equipment may only be used by qualified personnel who have read and understood the operating
instructions.
2.
Appropriate personal protective equipment must always be worn when using the equipment. Safety
helmet, safety shoes and work gloves are the bare minimum.
3.
Only the operators of the equipment may be present in the working area.
12

Publicidad

loading

Este manual también es adecuado para:

MbbhMbbs