Heath Zenith SL-6200 Manual De Instrucciones página 3

D. To change the code, either:
• Add a jumper to the same location on both the push button
and the matching chime or...
• Remove a jumper from the same location on both the push
button and the matching chime or...
• Move a jumper on the push button from one location to
another. Move the corresponding jumper on the matching
chime to match the new location in the push button.
Example: Move jumper at location "6" to location "3" on
both the push button and the chime.
Note: Code positions 1 through 7 must be exactly the
same for both the push button and chime for this system
to function.
Note: Unit will come factory set with the top push button jumpers
in locations 5, 6, and 7 and the bottom push button jumpers in
locations 4, 6, and 7 (see Figure 2).
598-1144-03
-3-