Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATIONS
3.1 Remote control battery installation
3.2 Installing the remote control on the steering wheel
2. In the picture you look the position of velcro
tape. You need to change the position of the
tape, unscrew it and remove both pieces.
3. Turn the tape.
4. Screw both pieces again.
1. The remote control uses a button type battery
CR2025.
2. To install or replace a battery, press the left flap
and pull the compartment out.
3. Place the battery with the positive polarity
upward, then replace the compartment.
1. Remove the remote control´s base pulling the two pieces apart.
5. Pull the velcro tape and place the base on the steering wheel.
6. Insert the remote control into base, matching the slots of both
pieces.
7 7
Publicidad
