Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATION
4. Press CH+, CH- button from remote control or use +/- from
transmitter to select a radio station.
5. Tune the same frequency into the car stereo.
6. Press
are using an audio device connected with a cable, press Play button in the audio device.
7. The audio signal will be listened into the car stereo.
8. Set the volume level.
The FM signal reception depends on the area and this can vary.
- Please, try to tune a non-signal radio frequency to avoid interferences.
- If you hear noise or distortion, we recommend to change the radio frequency. Test until you hear a clear
sound.
- When you use an audio device through the 2.5mm connector, you cannot use the Forward / Backward and
Play / Pause buttons to control it.
8 8
1. Connect the transmitter into the car cigarette lighter.
2. Plug an USB device or SD/MMC card into the transmitter or
connect a portable audio player using a cable with 2.5mm plug.
3. Turn the car stereo on and switch to radio function.
to play a song (only if you are using an USB device or SD/MMC card), if you
Publicidad
