Husqvarna FS 300 Serie Manual De Usuario página 4

WARNING: The dust can cause health
problems. Use an approved respiratory
protection. Always make sure that there is
good airflow.
Make sure that the cutting blade is
applicable to the same speed or a
higher speed than the value given on the
product. A cutting blade that is operated at
too high speed can break and cause injury
or damage.
Do not use the product near flammable
material or gases.
Make sure that the cutting blade is not
blunt or has damages, such as cracks.
Risk of cut injuries. Keep all body parts
away from the cutting blade.
The blade guards must always be
installed on the product. Do not let more
than 180° of the cutting blade show.
Keep body parts away from the cutting
blade and other moving parts.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use hearing protection, eye protection
and respiratory protection. Refer to
Personal protective equipment on page
7 .
All displacement of the machine outside
the cutting area shall be carried out with
the tool not in rotation.
Remove the blade before transportation,
when you lift, put on or remove the
product.
4
Machine stop button.
Lift/lower control.
Always lift the product at the lifting point.
Noise emission to the environment label
as refer to EU and UK directives and
regulations. The guaranteed sound power
level of the product is specified in
Technical data on page 18 , Noise and
vibration declaration statement on page
19 and on the label.
The arrow on the blade guard shows in
which direction the cutting blade rotates.
Gasoline is very flamma-
ble and explosive. Always
stop the engine and let it
become cool before you
refuel.
The exhaust fumes from the engine
contain carbon monoxide, an odourless,
poisonous and very dangerous gas. Do
not start the engine indoors or in closed
spaces.
Fill tank only with water.
Hot surface.
This product complies with applicable EC
Directives.
1919 - 002 - 23.01.2023