OMCR B01.16 Manual De Instrucciones página 5

G
DIE AXIS
WARNING
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
3.2.2 - OVERTURNING
5. Use and maintenance manual B01.16 - B02.30
DIE AXIS
G
ASYMMETRIC SLING EXAMPLE
(β1
REDUCTION FACTOR OF THE NOMINAL
CAPACITY LOAD
0.5
G = Die load center
β = Minimum rope angle from vertical
β1 = Maximum rope angle from vertical
SYMMETRIC SLING EXAMPLE
(RECOMMENDED CONDITION)
REDUCTION FACTOR OF THE
ANGLE
NOMINAL CAPACITY LOAD
β
0°≤ ≤40°
β
40°< ≤50°
β
50°< ≤60°
G = Die load center
β = Rope angle from vertical
NOTE: overturning with
San Maurizio C.se - 16/12/2020
β
> )
1
0.84
0.65
β
>60° is not provided
www.omcr.it