Publicidad
Idiomas disponibles
Idiomas disponibles
3.3
WARNING
WARNING
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
3.4
WARNING
3.4.1 - APPLICATION ON FLAT SURFACE
PIN INSERTION DIRECTION
LIFTING PIN B02.44.
BARRIER TO AVOID
THE WRONG PINS INSERTION
7. Use and maintenance manual B01.16 - B02.30
At the moment of the use, check the correct screws clamping and the use of screws with the
required lengths; in the following table are written down screws and clamping couples for the
fixing of the lifting brackets; it is recommended to use threadlocker LOCTITE 243 or lock
washers. Absolutely ensure a minimum screws clamping of 1 x Ø screw.
Example: for M36 screws use a minimum clamping of 36 mm.
LIFTING
BRACKET ART.
NR. SCREWS
NUM.
B01.16.4000
6
B01.16.6300
6
B01.16. lifting brackets should be mounted on steel plates (minimum Fe510, S355).
It is recommended to provide barriers to avoid the wrong pins insertion (see
DIE AXIS
SCREWS
CLAMPING COUPLE
DIN 912 CL. 8.8
M16x45
M20x60
San Maurizio C.se - 16/12/2020
[Nm]
210,8
411,9
Pic.1
).
SCREWS DIN 912 CL. 8.8
Pic.1
www.omcr.it
Publicidad
