OMCR B01.16 Manual De Instrucciones página 6

WARNING
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
3.2.3
WARNING
6. Use and maintenance manual B01.16 - B02.30
G
The die overturning is allowed only parallel with lifting pin axis.
ASYMMETRIC SLING EXAMPLE
(β1
REDUCTION FACTOR OF THE
ANGLE
NOMINAL CAPACITY LOAD
β
<15°
β
>40°
β1-β
>15°
G = Die load center
β = Minimum rope angle from vertical
β1 = Maximum rope angle from vertical
San Maurizio C.se - 16/12/2020
β
> )
0.5
www.omcr.it