VANTRUE Mirror 3 Manual De Instrucciones página 10

4.
Connect the docking station ⑨ with the M3 main dash
cam ⑩ via the TYPE-C power cable;
Plug the interior camera ⑪ into the docking station
5.
headphone jack ⑫ .
EN EN
Note:
⑤ is the reversing light wire, which is connected to the
reversing light in the fuse box;
⑧ is the rear reversing light wire, which is connected to the
rear reversing light of the car.
Please connect one of the reversing light wires as needed.
3.2.2 Hardwire Kit Installation(For 24 Hours Parking Mode)
1
12
Connect the docking station ① to the Hardwire kit②;
1.
Connect the Hardwire kit ③ with the rear lens extension
2.
cable ④;
3.
Connect the rear lens extension cable ⑤ to the rear lens ⑥;
4. The hardware kit ⑦ is the same as the installation method
of the normal ACC hardwire kit:
The black wire is the negative wire, which is connected to
the metal of the car; The red line is the ACC signal line,
which is connected to the ACC fuse of the car fuse box;
2
11
9
3 4
7
- 6 -
8
5
6
10