VANTRUE Mirror 3 Manual De Instrucciones página 18

4.4 Set Date & Time
There are two ways to set the time and date: automatically
and manually.
EN EN
Automatic update: After turning on the GPS, go to the "Time
Setting", turn on "Automatically sets the time by GPS", and
select your time zone, then the time and date can be
automatically corrected. Automatically sets the time by GPS
is ON by default.
Manual update: Go to the "Time Setting", turn off the
"Automatically sets the time by GPS", and then manually
adjust the time and date.
4.5 Auto LCD OFF
There are 3 kinds of display modes: 1 Min/3 Min/5 Min, and
OFF.
Please go to "Menu Setting" > "Auto LCD OFF", then switch
the screen mode. The default is off. If it is set to Off, it will
keep the screen always on.
Note:
1.
Please short press
2.
In the parking mode, in order to save power and increase
the protection time of the parking mode, the screen will
turn off within 3 seconds after the dash cam enters the
parking mode.
Automatically Sets The Time By GPS
Time zone
Manually Set Date /Time
24-Hour
Automatically Sets The Time By GPS
2049
2050
Time zone
2022
2023
Manually Set Date /Time
2024
05 06 11 33
06 07 12 34
07 08 13 35
08 09 14 36
09 10 15 37
button for screen off;
- 14 -
13:32
On Off
>
9-1
Fri
>
On Off
13:32
On Off
>
9-1
Fri
>