Publicidad
Idiomas disponibles
Idiomas disponibles
5.4.Taking a measurement
After the cuff has been appropriately positioned
the measurement can begin. Remain still during
your measurement, do not flex muscles.
a) Press the START/STOP button. The pump
begins to inflate the cuff. In the display, the
increasing cuff-pressure is continually displayed.
b) After automatically reaching an individual
pressure, the pump stops and the pressure
slowly falls. The cuff-pressure is displayed
during the measurement. If the inflation
pressure is not sufficient, the monitor auto-
matically re-inflates.
c) When the device has detected your pulse,
the heart symbol in the display begins to
blink.
d) When the measurement has been concluded,
the cuff deflates. The measured systolic and
diastolic blood pressure values as well as
the pulse are now displayed.
e) The measurement results are displayed until
you switch the device off. The device will
turn off automatically after 1 minute if no
buttons are pressed.
18
Pumping
Pressure
Measuring
Systolic
Diastolic
Pulse
Measurement
complete
Publicidad
