EN
INSTALLATION OF THE CHILD CAR SEAT
Group 1 (rear-facing)
(For children who weigh 9-18 kg)
•
1
Press
the
buttons in order to extend the Isofix connectors
to their full length.
•
Insert the Isofix connectors into the insertion aids
and press until they lock.
•
The display on both sides only turns green when
the connections have been established. Pull the
child car seat to the back rest until it is standing
securely.
•
2
Remove the Top-Tether from the bag.
•
In order to loosen the Top-Tether, press the grey
adjustment button with one hand and pull the
side of the belt anchor to the required length
with your other hand.
•
Pull the Top-Tether through the belt guide, which
is marked in blue, on the reverse side of the child
car seat.
•
Fix the anchor to the fixation point on the back
of the car seat.
•
Pull the Top-Tether tight by pulling on the oth-
er side of the belt. Make sure that the display is
green.
two
lateral
Isofix
connector
- 24 -
3
Grou
(For ch
Install
1