Getting Started; Speaker Connection - Technics SE-R1 Instrucciones De Funcionamiento

Getting started

≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Do not connect the AC mains lead until all other connections are complete.
≥ Insert the plugs of the cables to be connected all the way in.
≥ Do not bend cables at sharp angles.

Speaker connection

∫ Single wiring connection
e.g.,
SB-R1
≥ When using single wiring connection, set the speaker selector knob to [A] or [B]. (
1
Turn the knobs to loosen them, and insert the core wires into the holes.
2
Tighten the knobs.
8
(8)
Speaker cable
This unit
(rear)
Speaker cable
13)
SB-R1