Descargar Imprimir esta página

Lenco PDR-026 Manual De Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2. During DAB/DAB+ radio playback, press Menu repeatedly to display
the following information (if available):
Ensemble
Frequency
Signal frequency error
Audio state and bit rate
Time
Date
Radio text
Signal strength
Programme type
Power status (Mains or battery)
MANUAL STORING DAB STATIONS
You can store up to 30 preset DAB/DAB+ stations.
1.
Select the desired station.
2. Press and hold Preset for one second and then confirm by pushing Select so
that <Preset 1 stored> appears on the display.
3.
Repeat steps 1 to 2 to store more DAB/DAB+ stations.
4.
Or you can fast preset the favorite top 3 stations by press and hold the
1-2-3 button for approximately 2 seconds until 'Save to Preset' and the
numbered preset list is displayed.
Note: If there is already an existing DAB station stored under a preset, it will be
over written when you store the new station.
SELECTING PRESET DAB STATIONS
1.
Press Mode to select the DAB/DAB+ mode.
2.
Press Preset to access the Preset menu "Preset Recall"
<#: stored station name>.
3. Use the buttons Prev or Next or turn the volume knob to select a preset
number and confirm your selection by pressing Select.
USING THE DAB/DAB+ MENU
In DAB mode press and hold Menu for approx. 1 second and the display
shows the menu. Use the buttons Prev or Next or turn the volume knobto
10

Publicidad

loading