Lenco PDR-026 Manual De Usuario página 13

3. Repeat steps 1 to 2 to store more FM stations.
4. Or you can fast preset the favorite top 3 stations by press
Selecting a preset FM station
1. Press Preset to access the Preset menu.
2. Use the buttons Prev or Next or turn the volume knob to
Using the FM menu
1. Press and hold Menu in FM mode and select a menu
2. Confirm selection with Select.
SCAN setting
1. Press and hold Menu in FM mode and select with the
2. Press Select to confirm the selection.
3. Select a menu option with the buttons Prev or Next or
confirm by pushing Select so that <Preset 1 Saved>
appears on the display.
and hold the 1-2-3 button for approximately 2 seconds
until <Preset ... Saved> is displayed.
Note: If there is already an existing FM station stored
under a preset, it will be over written when you store the
new station.
select a preset number and confirm your selection by
pressing Select.
option with the buttons Prev or Next or turn the volume
knob
<Scan setting>
<System Setting>
<My EQ Setup>
<AMS>
<Alarm Setting>
Bass and Treble can be adjusted separately
buttons Prev or Next <Scan setting>.
turn the volume knob and confirm with Select.
•
<Strong stations only>
Scans for stations with strong signals
13