Publicidad
Idiomas disponibles
Idiomas disponibles
Display
When switched on for the first time, the display screen (including the key icon) switches on for 3
seconds. The gearwheel icon located in the centre then displays the operating state.
Display corresponding to normal operation
Should a failure occur, the corresponding LED light displays the relevant error code (displayed
continuously).
In the absence of any issues, the LED light displays the gearwheel icon corresponding to the
current operating mode of the fridge.
Fast cooling mode
Fast modulation of cold air circulation
Operation: The fast cooling indicator switches on and the fridge temperature goes down to 2°C.
The fast cooling mode deactivates automatically after 24hrs. You can also deactivate the "Fast
cooling" mode" by adjusting the temperature.
The Super Cool Mode may be used as a Super Freeze mode.
Freezer Temperature Setting
The setting is located behind the FRESH ZONE compartment
The freezing temperature is the lowest in the "COLDER" position. It is highest in the "COLD"
position. The "NORMAL" position is between the two above.
When the temperature is high, in summer, the freezer temperature must be set between
"NORMAL" and "COLD". If the ambient temperature exceeds 35°C, use the "COLD" position.
When the ambient temperature is low, in winter, the freezer temperature must be set between
"NORMAL" and "COLDER". If the ambient temperature is below 10°C, use the "COLDER"
position. This protects the compressor.
Door open alarm
• If the fridge door remains open for over 60 seconds, the door alarm will trigger
Publicidad
