Emos One Touch Pro ESI2010 Manual Del Usuario página 4

Following figure shows 10 minutes of watering
duration
SET WATERING FREQUENCY
After setting the watering duration and waiting
for 4 seconds, the LED light will switch to the
"1hour" position of the inner ring (green LED),
and begin to set the watering frequency. Re-
peatedly press the "Setting" button to select the
watering frequency. Wait 4 seconds to confirm
your setting.
Following figure shows watering frequency is
every 12 hours
OTHER
• Press the „Settings" button once to wake
up the LED and view the program
• Blue LED light indicates watering duration
• Green LED indicates watering frequency
• To turn off the timer press and hold the „Set-
ting" button until the LED for „OFF" lights up.
MANUAL WATERING
Hold the "Setting button" for 3 seconds, the
indicator light will switch to "ON" position and
start manual watering. If there is no operation,
manual watering will not stop. To turn off manual
watering press and hold the „Setting" button.
RESET
If you keep clicking with the blue LED to the
"OFF" LED it will blink 4 times, after this all
lights will light up briefly and all settings will
be cleared.
Care and Maintenance
The product is designed to provide trouble-free
service for many years if used appropriately.
Some advice for proper operation:
• Read the manual carefully before using
this product.
• Do not place the product in locations prone
to vibration and shocks – these may cause
damage.
• Do not place any open flame sources on the
product, e.g. a lit candle, etc.
• Do not place the product to places with
inadequate air flow.
• Use only clear fresh cold water.
• Do not tamper with the internal electric cir-
cuits of the product – doing so may damage
the product, which will automatically void
the warranty. The product should only be
repaired by a qualified professional.
• When expecting freezing temperatures,
timer should be removed from the hose
faucet and stored indoors to avoid potential
freeze damage.
• Filter traps dirt particles, prolonging life
of timer. Clean filter regularly and replace
if worn.
• To clean the product, use a slightly mois-
tened soft cloth. Do not use solvents or
cleaning agents – they could scratch the
plastic parts and cause corrosion of the
electric circuits.
• Do not immerse the product in water or
other liquids.
• In the event of damage or defect of the
product, do not perform any repairs by
yourself. Have it repaired where you pur-
chased the product.
• This device is not intended for use by per-
sons (including children) whose physical,
sensory or mental disability or lack of
experience and expertise prevents them
from safe use of the device, if They are
not supervised or if they have not been in-
structed regarding the use of this appliance
by a person responsible for their safety. It is
necessary to supervise children to ensure
they do not play with the device.
4