Symbol Information
Symbol
Referent
For in vitro diagnostic use
Read instructions before use
Use by/ Expiry date
Batch code
Serial number
Green Dot: German dual waste
disposal system
CE Mark
0459
Troubleshooting
If you follow the recommended action but the problem persists, or error messages
other than the ones below appear, please call your local customer service.
Error Message
Error Message
Err 1
Err 2
Err 3
Err 4 or Err 5
Err 8
Err 15
Cause
Inflation or pressure error.
Cuff pressure is too high.
No pulse rate detected or
the pulse rate is too low.
Forced to stop the blood
pressure measurement
after repump for 2 times.
Data corrupted.
Symbol Referent
Do not reuse
Type BF equipment
Temperature limitation
Biological Risks
Manufacturer
Caution, consult accompanying
documents
Error Type
Error Number
What To Do
Please contact local customer service
for help.
Refit cuff tightly and correctly. Relax and
repeat the measurement. If the error still
remains, please contact local customer
service for help.
Turn off the device and start over. Follow
the instructions and try again.
Follow the instructions and try again.
If problem persists, contact the local
customer service for assistance.
EN-22
D40 Owner's Manual