BS Charger PB-02 Manual De Instrucciones página 3

EN
User manual for POWERBOX PB-02
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
The POWERBOX PB-02 can start engine equipped with Lead Acid batteries only.
⚠
It is not recommended for lithium batteries.
PRODUCT LAYOUT
LED FLASH LIGHTS
JUMP START
SOCKET
USB 5V/3A, 9V/2A
12V/1.5A OUTPUT PORT
USB 5V 2A OUTPUT PORT
WARNING
This manual includes guidelines on the operation of your device and the precautions to follow for your own safety. Ensure
it is read carefully before first use and keep it handy for future reference. This device should only be used for start-up
and / or power supply within the limits indicated on the device and in the manual. The safety instructions must be
followed. In case of improper or unsafe use, the manufacturer cannot be held responsible.
This device may be used by children from age 8 and by persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device
safely and are aware of the potential risks. Children must not use the device as a plaything. Cleaning and servicing tasks
may not be carried out by children unless they are supervised.
Do not use for charging non-rechargeable batteries
Do not operate the device with a damaged power supply cord or a damaged mains plug.
Do not use any charger other than the one supplied with the machine to charge the batteries.
Do not use the device if the charging cable appears to be damaged or assembled incorrectly in order to avoid any risk
of short circuiting the battery (Power Box charger).
Never charge a frozen or damaged battery.
Do not cover the device. Do not place the device near a fire or subject it to heat or to longterm temperatures exceeding
50°C.
Risk of explosion or acid projection if the clamps are shortcircuited or if the 12V booster is connected to a 24V vehicle
or vice versa.
The automatic mode of operation and usage restrictions are explained below in these operating instructions.
| www.bs-battery.com
LED DISPLAY
ON/OFF SWITCH
5V 2A INPUT PORT
15V 5A OUTPUT PORT
PB-02
3