Hkoenig kbp40 Manual De Instrucciones página 11

NOTE: Do not use organic solvent, boiled water,
detergent, strong acid and strong alkali etc. for cleaning.
9. Please empty the water reservoir and dry it for
storage if the ice maker is not used for a long time.
Fig.1
Fig.2
TROUBLESHOOTING
Problem
1.
2.
of water reservoir is blocked.
indicator 3.
turns on
4.
not connected with external water
source, or the external water source is
closed.
1.
light is blocked by the ice.
2.
light-receiving diode do not work
indicator
lights up
Possible causes
Low water level or lack of water
The water screen at the bottom
Pump malfunction.
The water inlet of Ice Maker is
Ice basket is full and the infrared
Infrared light-emitting diode &
Fig.3
1. Stop making ice, refill water and then press key to
restart ice-making cycle.
2. Do cleaning.
3. Send it to the authorized department for repair.
4. Check and make sure the external water source is
connected well or opened.
1. Remove the ice from ice basket.
2a. Wipe up the foreign objects on the infrared
light-emitting diode & light-receiving diode and restart
the ice maker.
2b. Call Customer Service if the infrared light-emitting
diode & light-receiving diode still can not work after
wiping up the foreign objects on them and restarting
the ice maker.
Solution