Publicidad
Idiomas disponibles
Idiomas disponibles
FOR SHAVING
1. Keep the unit clean and dry at all times.
2. Remove the protection cap by grasping the sides and lifting up.
3. Check to make sure the outer foils and inner cutters are not damaged. Replace
damaged parts before using. For more information on replacement parts, contact
Andis or the nearest Andis Authorized Service Station.
4. Ensure that the battery is charged.
5. Wash and dry your skin thoroughly prior to shaving.
6. Slide the ON/OFF power switch up to the ON position.
7. Gently stretch the skin of your face with your free hand while moving the shaver
slowly and smoothly against the grain of your beard. Using short, circular strokes
will make the hairs stand out from your face and make shaving easier.
8. In order to achieve the closest shave and avoid unnecessary wear on the foils, be
sure that both foils contact the skin simultaneously at all times.
9. To facilitate cutting and avoid foil wear, use minimal pressure to apply the shaver
to your skin.
10. To maximize shaving comfort, be sure to clean the shaver thoroughly after use.
USER MAINTENANCE
If shaver is to remain unused for a long period of time, store in a safe, cool, dry
place. Do not wrap cord tightly around shaver. Do not hang the shaver by the power
cord. Other than the recommended maintenance described in this manual, no other
maintenance should be performed, except by Andis Company or an Andis
Authorized Service Station. To find an Andis Authorized Service Station near you, log
on to www.andis.com or contact our customer service department: 1-800-558-9441.
IMPORTANT: For best shaver performance and results, it is recommended
that you replace your shaver's foil assembly and cutters every six months.
6
Publicidad
