Bosch Rexroth VM310 Manual Del Usuario página 15

3 609 929 A96/06.04 | VM310
4 Assembly Instructions
Danger of shock due to insufficient
protective conductor connections!
Protective conductor connections
must not be impaired by mechani-
cal, chemical or electrochemical
influences. The connection has to
be permanent.
Bosch Rexroth AG
4 Assembly Instructions
The supply module VM310 must be inserted
into the 1st left slide-in slot in the BT300 card
rack or the SB30x system box.
3 Min
Take care that the supply module is fully in-
serted.
The front knurled bolts must be tightened.
Take care that the front blind fits closely to
the BT300 card rack or the SB30x system
box.
15/52
Before inserting the
supply module, the
BT300 card rack must
be switched to neutral.
A discharging time of
at least three minutes
should be taken into
account.