Skil 0650 Manual Original página 11

a
Cordless pole saw/pruner
INTRODUCTION
• The power tool is intended to be used for limbing and
pruning of trees
• This tool is not intended for professional use
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Read and save this instruction manual 3
• Pay special attention to the safety instructions
and warnings; failure to follow these may result in
serious injury
TECHNICAL DATA 1
Replacement chain: 90PX033* (the * is a character that only
determines the packaging method, e.g. carton, blister, bag,
etc., not relevant)
Replacement chain bar: 084MLEA041
TOOL ELEMENTS 2
A Guide bar
B Saw chain
Locking knob
C
D Cover plate
E Ventilation slots
Pivoting head
F
G Front pole
H Threaded sleeve (2)
J Chain tensioning sleeve
Gripping teeth
K
L Chain guard
M Pivoting-head release button
Easy storage hook (2)
N
P Threaded connector (2)
Q Extension pole
R Shoulder strap
S Easy storage rail (2)
T U link
U Front handle
Rear pole
V
W Safety switch
X Trigger switch
Rear handle
Y
Z Minimum mark
AA Oil reservoir cap
AB Battery level indicator
AC Oil outlet
AD Symbol for rotation and cutting direction
AE Fastening bolt
AF Guide fins for chain bar
AG Drive sprocket
AH Metal plate
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions,
-
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below may
0650
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery-operated (cordless)
power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch on
11