Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INSTRUCTIONS
Before you use it, please read the following safety instructions.
•
Read all the safety information and instructions before using the
product. When passing this product to some one, include all documents.
•
If you do not follow the operating instructions provided, it may
compromise the safety of your product and this may invalidate the
warranty.
•
The internal battery in this product is not user replaceable .Do not
expose the battery to excessive heat or naked flames. Ensure adequate
ventilation and airflow around the product , particularly when charging.
Dispose of the product in accordance with local environment all rules.
•
Using the product in rooms or climates with high humidity and
temperatures may cause condensation to form inside the product,
which can damage the product. Use the product in moderate climates
only.
•
Do not use your product in extremely hot or cold temperatures . Keep
the device away from heat sources , such as radiators or gas/electric
fires. Do not expose your product to naked flames, such as lighted
candles.
•
To charge your product, only connect it to a supply source that meets
the safety
•
Isolation requirements of EN 62368-1 or EN 60950-1 for an accessible
safety extra low voltage circuit. For this connection, use either the
supplied USB Type-C cable or a suitably CE approved power adapter
with the correct USB output rating.
•
Power the product using an external 5V DC 1 A power supply. The
maximum output is 1 A, protected by an internal circuit.
•
Before you charge your product ,ensure that the available supply
voltage corresponds with the required operation al voltage of the
product.
•
Disconnect your product from the charging power supply if you will not
use your product for a long period of time (for example, if you are going
on holiday).
•
Always unplug your product from the charging power supply before
cleaning. When cleaning the product ,do not use any type of abrasive
pad or abrasive cleaning solutions as these may damage the product's
surface.
•
To reduce the risk of electric shock, do not remove any screws. The
product does not contain any user-service able parts inside. Product
repairs should only be carried out by authorised personnel.
EN
25
Publicidad
