Hilti AG 6D-22-150 Manual De Instrucciones Original página 40

Item Equipment
Clamping nut
H
(standard)
Clamping flange
I
(standard)
Kwik lock
J
(optional for I)
Clamping nut
K
(abrasive resin-fiber
disc)
Support plate
L
(abrasive resin-fiber
disc)
5 Technical data
5.1 Product properties
Weight in accordance with EPTA Procedure 01, without battery
Rated voltage
Rated speed
Maximum wheel diameter
Drive spindle thread
Spindle length
Maximum core bit diameter
Ambient temperature for operation
Storage temperature
5.2 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5.3 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: Maintaining the power tool and accessory tools, keeping the hands warm,
organization of work patterns.
Noise information
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
32 English
AC-D AP-D AG-D
AF-D
AN-D
✓ — ✓
✓ — ✓
✓ — ✓
— ✓ —
— ✓ —
)
pA
)
pA
DG-CW DC-TP
(SPX/SP/P) DC-D
(SPX/SP/P)
✓ ✓
✓ ✓
— ✓
— —
— —
2.0 kg
21.6 V
8,500 /min
150 mm
M14
22 mm
125 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
85 dB(A)
3 dB(A)
2282185
*2282185*
3CS/4CS
3SS/4SS
DD-M14
—
—
—
—
—