UK
INSTRUCTION MANUAL
Please recharge the earphones before use.
Charging the case
Using the supplied cable, connect a charger to the USB and to
the case's type C port;
LCD display will show capacity.
Charging the earbuds
Put the earbuds into the charging case, LED will flash and
when fully charged LED will turn off .
Power on the earbuds
A. The earbuds will switch on automatically when they are
removed from the charging case
B. Long press earbud 3 seconds will power on
Power off the earbuds
A. The earbuds will turn off automatically in case, when
inserted into the charging case.
Remark: If not power off, insert into case one more time in
case not put into right position please check if the pins are
covered.
When earbud outside case more than 2 minutes, and no
Bluetooth devices are connected, will power off automatically
B. Long press earbud 5 seconds to power off. If low battery
earphones will switch off.
How to put the earphones onto the ears:
1. Chose the correct size earpad (S,M or L)
2. Rotate the earphone onto the ear until it is properly fixed
3. Adjust the earpad into the ear
6