Gardena ClassicCut Li Instrucciones De Empleo página 16

The 5 V power supply unit with USB socket is not
included. To use the battery shear, a USB power
supply unit (5 V) with certified / country-specific
standard approvals is required.
To achieve the full charging speed and shortest
charging time, a 2 A power supply unit is recom-
mended. A USB power supply unit with lower
current will extend the charging time.
The battery is delivered partially charged. To ensure
the full performance of the battery, fully charge the
battery before the first use.
The battery shear does not function while charging.
1. Open the dust cap
2. Plug the USB-C plug © of the supplied USB
charging cable into the charging socket
3. Plug the USB-A plug
cable into the power supply unit.
4. Connect the power supply unit into a mains
socket.
The battery is charging. The green LEDs (
(L3)
and ) indicate the current charging progress.
When the battery is fully charged, all 3 LEDs
(L1) (L2) (L3)
( , and ) light green for 300 seconds.
5. Examine the charge status regularly while you
charge.
16
9884-20.960.01.indb 16 9884-20.960.01.indb 16
(1)
.
(2)
.
(A)
of the USB charging
(L1)
,
6. Disconnect the USB-C charging cable from the
charging socket
7. Close the dust cap
1.2 Battery charging indicator [ Fig. O2 ]:
1.2.1 Battery charging indicator during
charging:
When the battery is completely charged
(100 %), (L1) , (L2) and
Battery charging indicator
(L1) (L2) (L3)
, and light
(L1) (L2) (L3)
and light, blinks
(L1) (L2)
lights, blinks
(L1)
blinks
(L2)
1.2.2 Battery charge status indicator during
operation:
After starting the product, the battery charge
status indication is displayed for 5 seconds.
(2) .
(1) .
(L3) light for 300 seconds.
Battery charge status
100 % charged
66 – 99 % charged
33 – 65 % charged
0 – 32 % charged
28.07.22 11:42 28.07.22 11:42