A
B
C
D
E
GB | Smoke Detector
This manual contains important safety information regarding the installation and operation of the
detector. Carefully read this manual and store it safely for future use. Familiarise other residents of
the building with the operation of the detector.
Create an evacuation plan in case of fire and perform a drill every month. All residents of the building
should be familiar with the detector signals in order to be able to immediately react to them. The
detector allows the detection of slow burning flames accompanied by thick black smoke. These
flames can take hours before they turn into a large fire.
Warning:
If construction work causing a large amount of dust is taking place on your premises, you should
dismount the detector from the mounting plate to protect it from dirt. If you cannot do so for any
reason, cover the openings of the detector for the duration of work, by e.g. a plastic bag. A covered
detector will not detect smoke. Uncover it every day after work is finished.
Technical Information:
Sensor type: photoelectric cell
Service life: 10 years
Operating temperature and humidity: 0 °C to +40 °C, 5 to 95 % (without condensation)
Enclosure: IP20
1.
2.
3.
4.
5.
2