Profi Care PC-BHT 3015 Manual De Instrucciones página 82

Putting on and Taking Off the Attachments
WARNING:
Always switch the appliance off before you fit attachments or accessories!
• You can take off an attachment by turning it anticlockwise and pulling it off.
• When putting on an attachment, please pay attention to the marks on the attach-
ment and the appliance. Put on the attachment and turn it clockwise until it clicks
into place.
• To put the comb attachment (10) onto the beard / hair trimmer (9), do the
following:
- Slide the blades of the shaving head into the spikes of the comb attachment.
Press the attachment onto the shaving head tightly. It must audibly clicks into
place.
- To remove the comb attachment, press the catch lock until it disengages.
• To attach the long hair attachment (11) to the body hair trimmer (1), align the
small catch with the slot on the body hair trimmer. Push the attachment down until
it clicks into place.
• To remove the long hair attachment, press one of the outer tines up.
CAUTION:
Do not press the middle tines up. They could bend or break off.
Cut Hair and Beard
WARNING: Risk of Injury!
Do not press the shaving head of the beard / hair trimmer too firmly onto the skin.
NOTE:
Only cut dry hair with this appliance.
1. Put the beard / hair trimmer onto the appliance.
2. Fasten the comb attachment. Select a cutting
length.
• To select the cutting lengths, press and push
the lock button on the top side of the comb
attachment.
• The length settings are marked to the left of
the lock button.
82
PC-BHT3015_IM_new
Cutting length
Setting
in mm
1 approx. 8
2 approx. 10
3 approx. 12
4 approx. 14
22.04.21