Andis US-1 Instrucciones De Uso Y Cuidado página 4

OPERATING INSTRUCTIONS
Before starting clipper remove blade guard. Plug cord into electrical outlet, operate
at 120 volt, 60 cycle AC electrical current or as noted on the unit. To start clipper
move switch button forward, to stop, move switch button back to original position.
After using your Andis clipper, rewrap cord and store in a safe place.
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made
for your Andis clipper. The combs mount easily; simply slip the cutter blade teeth
into comb and snap the comb down. To remove, simply snap off (Figures A & B).
These attachment combs guide hair into the blades and give you precise control of
hair lengths. The length of trim is indicated on the attachment comb. Use the chart
below to find the approximate lengths of cut. Different blade angles in relation to the
skin, thickness and texture of the hair will vary the cutting length.
Description
Standard Andis Blade
1/16" Attachment Comb
1/8" Attachment Comb
1/4" Attachment Comb
3/8" Attachment Comb
1/2" Attachment Comb
5/8" Attachment Comb
3/4" Attachment Comb
7/8" Attachment Comb
1" Attachment Comb
4
CLIPPING GUIDE
Clipping
Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Approximate Length of Cut
Blade set to
shortest cut
1/16" (1.6 mm)
1/32" (0.8 mm)
3/16" (4.8 mm)
3/32" (2.4 mm)
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
3/4" (19.0 mm)
5/8" (15.9 mm)
7/8" (22.2 mm)
3/4" (19.0 mm)
1" (25.4 mm)
7/8" (22.2 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
Blade set to
longest cut
3/16" (4.8 mm)
1/8" (3.2 mm)
5/16" (7.9 mm)
5/32" (4.0 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
1" (25.4 mm)
7/8" (22.2 mm)
1-1/8" (28.6 mm)
1" (25.4 mm)
1-1/4" (31.8 mm)
1-1/8" (28.6 mm)
1-3/8" (34.9 mm)
1-1/4" (31.8 mm)