The trampoline may have fixings with self-locking
nuts. These self-locking nuts are for single use
only and must be replaced when dismantling and
reinstalling the trampoline.
See page 5 and onwards for instructions on how
to install the product.
Install accessories according to the installation
manual /guide.
Should
the
trampoline
to another current location (short distance),
disassemble the anchors (if any) first prior to
relocation. It is recommended the trampoline be
lifted via the top rails by at least 4 adults.
Should the trampoline be removed and placed in
an alternative area not close to original location,
dissasemble and place in original packaging. Re-
assemble in accordance to the assembly and
installation instructions.
FlatGround installation and dismantling:
Location: Find a suitable place for the installation
of the trampoline ensuring there are no
surrounding obstacles. Verify soil condition
and characteristics of designated location to
determine installation suitability.
While digging the hole, soil should be firm to avoid
collapsing due to erosion. If necessary, strengthen
the sides of the hole or make them smooth to
prevent this.
If the ground is too hard to dig, it would be
better to choose another location, or contact a
groundwork professional.
Verify if a high ground-water level does not
contribute to a collection of water in the hole.
In addition, verify there is adequate drainage to
dispose rain water.
In addition, verify there is adequate drainage to
dispose rain water.
Maintenance instructions
General maintenance instructions:
Inspect the BERG Trampoline before each use
according to the installation instructions and
replace defective, worn or missing parts. Ignoring
these instructions and failing to carry out
maintenance could lead to dangerous situations
and unnecessary risks for the user. To order
original BERG Trampoline parts and accessories,
please refer to your dealer or visit www.bergtoys.
com.
Check the condition of the frame parts (broken
welds, bent frame or sharp and protruding parts)
and replace them if necessary.
Check the condition of the springs (broken or
excessive stretching) and the attachment of
the springs to the frame and jumping mat. The
springs and the suspension system are subject to
17
require
movement
wear and tear; replace worn parts in time.
Check that the bolt connections are tight and
retighten them if necessary. Check that the
connections (pressure pins) are secure and check
that they do not come loose when trampolining.
Check the condition of the jumping mat (damage,
wrong tension, loose stitching or sagging of the
mat). The jumping mat will wear out through use
and exposure to sunlight (UV radiation). Replace
the jumping mat in time when the condition of
the mat starts to deteriorate.
Check the condition of the protective edge and
its attachment to the frame. Replace a defective
protective edge.
Fertilisers (liquid fertiliser or fertiliser granules,
etc) must not be used within a 2-metre radius of
a BERG Trampoline. The use of such products can
be harmful to the trampoline materials.
The jumping mat and protective edge are easily
cleaned with a cloth and some cold or lukewarm
water. Do not use solvents, detergent, soap
powder or hot water under any circumstances.
Repairs must be carried out by a professional.
Please consult your BERG dealer.
Regular maintenance instructions:
Strong winds and gusts can displace the
trampoline. We recommend anchoring the
trampoline with stakes or sandbags, or removing
the jumping mat prior to windy weather.
In some countries, the weight of the snow in
winter and the very low temperatures can damage
the trampoline. BERG recommends storing the
jumping mat and the safety net indoors in winter.
Ensure a secure and safe environment when
the trampoline is not in use. Protect it against
unauthorized use. When a trampoline ladder
is used, remove when left unattended. This to
ensure no access for children without supervision.
If the trampoline is not used for short periods
of time and to avoid jump mat debris caused by
fallen leaves and twigs, BERG recommends usage
of a BERG Weather Cover. When the trampoline
is not used for a longer period of time (e.g.
during the winter) BERG recommends storing the
trampoline, especially the protective padding, in a
dry area to support product longevity.
FlatGround maintenance instructions:
After a rainy period and prior to usage, inspect
the trampoline hole. Ensure there is adequate
drainage to dispose of rain water.
As per the diagram in the installation manual,
use the included tape measure (located in the
packaging) to measure and determine the correct
diameter, depth and shape of the dug hole.
Inspect the hole under the trampoline regularly
(at least 1x per year) and take corrective action