PNI PMR R18 Manual De Usuario página 13

Key lock
Press the FUN + ENT/ key. On the screen, in the upper right corner, the icon will appear, and the voice prompt will announce "Key
locked". Now all keys are locked except PTT, Monitor and FUN key. Press the FUN + ENT/ keys again. The icon will disappear from
the screen, and the voice prompt will announce "Key unlocked". Now all keys are unlocked.
TOT (Timeout timer)
Press the FUN + 9 SET key to enter the menu. Turn the channel selector until "TOT ?" appears on the screen. Press the ENT/ key
to enter the interface with options: OFF, 30, 60, 90, 120, 150, 180, 210, 240, 270. Press the ENT/ key to confirm the selection.
Note: Transmitting for a long time can damage the radio, therefore we recommend setting a maximum transmitting time.
Scan mode
Press the FUN + 9 SET key to enter the menu. Turn the channel selector until "SCANS?" appears on the screen. Press the ENT/
key to enter the interface with options: TO, CO, SE. Press the ENT/ key to confirm the selection.
TO - Time Operation Mode. When the radio detects a signal, it will stop scanning for 5 seconds after which it will resume scanning
even if the signal persists.
CO - Carrier Frequency Mode. When the radio detects a signal, it will stop scanning and stay on that channel until the signal
disappears. After 2 seconds from when the signal disappears, it will resume scanning.
SE - Search Scan Mode. When the radio detects a signal, it will stay on the respective channel or frequency and exit the scanning
mode.
Voice prompt
Press the FUN + 9 SET key to enter the menu. Turn the channel selector until "VOICE?" appears on the screen. Press the ENT/
key to enter the interface with options: OFF, CHS, ENG. Press the ENT/ key to confirm the selection.
OFF - voice prompt disabled
User manual - 13