Kongskilde MultiCutter MCC GR250X Manual Operativo página 3

EN
Operating instructions Granulator GR 250X
GR 250X:
GR 250X has been developed for continuous cutting of paper, cardboard and plastic, e.g. edge trimming of
roll cutters and printing machines, etc. The Granulators are so that they can be built into both new and
existing pipe systems.
Standard:
Granulator GR 250X with 3,0kW motor, 3x400V, 50Hz.
Accessory:
Integrated frequency converter for 500-4000 rpm.
Gear motor for high torch
Transition piece for integration into other pipe sizes.
Oil system.
Granulator marking:
Granulator type GR 250X with product number 100820X.
The Granulator is also marked with the CE mark and an arrow showing the direction of rotation and
through-flow direction.
Manufacturer:
Lundberg Tech A/S
Foldagervej 12B, 4623 Lille Skensved, Denmark
1
Manual_GR250X_180123_EN