Uline H-10385 Manual De Instrucciones

H-10385, H-10386
H-10387
WIRE BASKET CARTS
TOOL NEEDED
Rubber Mallet
Post x 4 Basket x 1
Figure 1
1. Start with the lowest shelf. Snap the interlocking
pieces of a shelf support (wide end down) around
the post at the lowest groove where shelf is to be
located. Slide the support up or down until it snaps
onto the groove. Add a shelf support to the same
place on the remaining posts. (See Figure 2)
NOTE: NSF requires food service applications to
keep the lowest shelf at least 6" above the floor.
Figure 2
PAGE 1 OF 6
1-800-295-5510
uline.com
PARTS
Shelf x 2
CASTER INSTALLATION
TO INSTALL CASTERS
1. Make sure post is positioned as shown. (See Figure 1)
2. Engage the wheel brakes to keep casters from rolling during assembly. Use
a rubber mallet to tap caster stems into posts. (See Figure 1)
ASSEMBLY
Shelf
Support
Pour le français, consulter les pages 5-6.
Handle x 1
2. Slide post through underside of shelf until shelf slides
firmly over supports. (See Figure 3)
NOTE: Shelf should be placed so 1" lip faces
upward.
Figure 3
Para Español, vea páginas 3-4.
Shelf Support Caster x 4
x 14 Sets
1122 IH-10385