Publicidad
Idiomas disponibles
Idiomas disponibles
AGS3
Access
8 10 Remove drain connection R1 and ensure that it does not hamper with the handling of the fan shroud L1.
8 11 Unscrew the fixing screws "D" of the fan shroud L1 to the internal drip tray L3; unscrew the fixing screws "C" from inner
side panels L2, remove baffle L4 and bring fan shroud L1 to the position shown in the figure.
8.12 Loosen the self-threading screws "A", without removing them completely.
8 13 Unscrew self-threading screws "B", then remove side panel L6.
Reassembling
8 14 Reposition side panel L6 and fasten it with screws "A" and "B".
8 15 Take fan shroud L1 to its original position ensuring that the side panels L6 are inside and fasten it with screws "C".
8 16 Reposition baffle L4 and fasten screws "D" to the inner drip tray L3.
8 17 Reassemble the drain connection R1.
L1
=
Fan shroud
L2
=
Inner side panel
L3
=
Inner drip tray
L4
=
Baffle
L5
=
Supports
L6
=
Side panel
R1
=
Drain connection
SD
=
Junction box (fans and heaters)
=
Ground pole
38
www.modine.com
Figure 5
Publicidad
