Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Turn the rotary CH knob (5) or use the UP/DN buttons (13) on the
microphone to
select
the EMG 2 menu.
Items 2 to 7 are identical to those in EMERGENCY 1 SET.
Emergency channel 2 default is 19 AM.
See § EMERGENCY CHANNELS page 44.
13) PA SETTING
This function allows to
select
Address.
Press the CH knob (5) for 3 seconds to
1. Turn the rotary CH knob (5) or use the UP/DN buttons (13) on the
microphone to
select
the PA SET menu.
2. Press the CH knob (5) to
validate.
3. Turn the rotary CH knob (5) or use the UP/DN buttons (13) on the
select
microphone to
the operating mode of the
OF.
4a. Short press the CH knob (5) again to
in the MENU.
4b. Long press (1s) the CH knob (5) again to
exit
in the MENU.
disappears from the display.
5. If no key is pressed, the unit
appears in the display.
-
PA: the
modulation of the microphone
are transmitted to the Public Address loudspeaker connected to
jack PA.SP. (D). "PA" flashes alternately with the modulation mode
used: AM, FM, LSB, SSB or FM UK (only in U configuration).
modulation of the microphone
-
I n: the
loudspeaker connected to jack PA.SP. (D). The
is transmitted to the internal loudspeaker [or external optional
loudspeaker connected to jack EXT.SP (C)]."PA" flashes alternately
with the modulation mode used: AM, FM, LSB, SSB or FM UK (only
in U configuration).
-
OF: The reception is no more functional. Only the
the microphone
is transmitted to the Public Address loudspeaker
connected to jack PA.SP. (D). "PA" is displayed, channels are
replaced by PA.
the operating mode of PA, Public
enter
MENU.
appears.
The PA type blinks on LCD.
PA
: PA, I n or
validate
the PA type and
validate
the PA type and
exits
MENU after 10 seconds,
and the
received signal
is transmitted to external
received signal
modulation of
PA
mode, press PTT switch to display "PA LEVEL". Then turn the
In
rotary CH knob (5) to
PA setting default is: PA.
See § PA (Public Address) page 43.
14) RESET
Resets all user-defined settings and returns to default values.
Press the CH knob (5) for 3 seconds to
1. Turn the rotary CH knob (5) or use the UP/DN buttons (13) on the
microphone to
select
2. Press the CH knob (5) to validate. "CONFIRM" is displayed, no flashes
in the display.
3. Turn the rotary CH knob (5) or use the UP/DN buttons (13) on the
microphone to display
4. Press CH knob (5) again to confirm.
5. If no key is pressed, the unit
stay
appears in the display.
A) DC-POWER TERMINAL (13.8 V / 27.6 V)
B) ANTENNA CONNECTOR (SO-239)
dis-
C) EXTERNAL SPEAKER JACK (8 Ω, Ø 3.5 mm)
D) PA SPEAKER JACK (8 Ω, Ø 3.5 mm)
E) JACK FOR OPTIONAL VOX MIKE (Ø 2.5 mm)
50
the audio level of the PA.
adjust
enter
MENU.
the RST ALL menu.
.
exits
MENU after 10 seconds,
appears.
dis-
Publicidad
Tabla de contenido
