ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool kit is used to pull off ignition coils/ignition modules, disconnect connectors on ignition coils,
mass air flow meters, vacuum sensors and loosen oil drain plugs on VAG engines.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if it is damaged.
•
Use the tool for the intended purpose only.
•
Never remove or install the ignition coil while the engine is running or the
ignition is switched on!
•
Before disassembly or assembly, make sure that the ignition is switched off!
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
USE
#1
#5 (6)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
#3
#7
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
#4
#8
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed