Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
FILTER BAG (Fig. 13)
INSTALLATION INSTRUCTIONS:
A Filter Bag (J) may be used in place of or in addition to
the Qwik Lock™ Cartridge Filter (H).
NOTE: When picking up dry debris a Filter Bag or
Cartridge Filter must be properly installed.
NOTE: The Replacement Filter Bag is VF3502.
1. Filter Bag (J) to be used to pick up dry debris only.
2. Correct positioning of Cardboard Collar is required
to assure proper seal.
3. Locate the Rib on Inlet Tube, inside the Dust
Drum (C).
4. Slide Cardboard Collar onto Inlet Tube past the Rib,
and against the inside of the Dust Drum (C).
5. With the Cardboard Collar securely installed, unfold
and position Filter Bag (J) inside Dust Drum,
as shown.
REMOVAL INSTRUCTIONS:
1. Slide Cardboard Collar toward center of Dust
Drum (C).
2. Remove Filter Bag (J) from Dust Drum (C) and
discard.
3. Install new Filter Bag (J).
WARNING:
Do not operate without filter cage. To avoid health
hazards from vapors or dust, do not vacuum toxic,
carcinogenic or other hazardous materials such
as asbestos, arsenic, barium, beryllium, lead,
pesticides or other health endangering materials.
CAUTION:
To avoid spilled debris, when picking up heavy
or sharp material, monitor bag volume and do
not overfill.
(C)
12
Fig. 13
(C)
(J)
Cardboard
Inlet
Collar
Tube Rib
Cardboard
Collar
(J)
Rib
Inlet
Tube
Publicidad
