Descargar Imprimir esta página

Senix TL4QL-L1 Manual Del Operador página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

vibrate abnormally, stop the engine
(motor) and press and hold the On/
Off switch in the off position till the
engine stops. The switch will return to
the on position automatically.
• Check immediately for cause.
Vibration is generally a warning of
trouble. If the noise or vibrations
of the machine increase, stop
immediately and perform an
inspection.
• Never leave the machine unattended
when the engine is running. Press
and hold the On/Off switch in the off
position till the engine stops. The
switch will return to the on position
automatically. The OFF switch
will come back to the ON position
automatically.
• Regularly inspect the machine. Make
sure parts are not bent, damaged or
loose.
• Temperature of muffler and nearby
areas may exceed 150° F (65° C).
Allow muffler and engine areas to
cool before touching. Never pick up or
carry the machine while the engine is
running.
• Prolonged exposure to noise and
vibration from gasoline engine-
powered equipment should be
avoided. Take intermittent breaks and/
or wear ear protection from engine
noise as well as heavy work gloves to
reduce vibration in the hands.
• Keep all screws, nuts and bolts tight.
• Do not transport the machine from
one place to another with the engine
running.
• When moving the packaged machine,
always do so with a partner.
• Check local regulations for age
restrictions on use of this machine.
PRODUCT-SPECIFIC SAFETY RULES
• Do not cultivate above underground
utilities, including water lines, gas
lines, electric cables, or pipes. Do not
www.senixtools.com
operate the machine on terrain/soil
with large rocks and foreign objects
which can damage the equipment.
• After striking a foreign object, stop
the engine. Press and hold the On/
Off switch in the off position till the
engine stops. The switch will return to
the on position automatically. Inspect
the machine for damage. If damaged,
repair before starting and operating
the machine.
• The tines of the cultivator should not
rotate when the engine is idling. If
it does rotate when engine is idling,
contact us at 1-800-261-3981.
• If an object becomes lodged in
the tines, press and hold the On/
Off switch in the off position till the
engine stops. The switch will return to
the on position automatically. Allow to
cool before attempting to remove the
foreign object.
• The clutch will transfer maximum
power after about two hours of normal
operation. During this break-in period
clutch slippage may occur. The clutch
should be kept free of oil or other
moisture for efficient operation.
ENGINE SAFETY PRECAUTIONS
If your product comes with a separate
engine manual, be sure to read
and follow all safety and warning
precautions outlined there, in addition
to any in this manual.
Preventing Carbon Monoxide Poisoning
• Always start and run engine outdoors.
Do not start or run engine in an
enclosed area, even if doors or
windows are open.
• Never try to ventilate engine exhaust
indoors. Carbon monoxide can reach
dangerous levels very quickly.
• Never run engine outdoors where
exhaust fumes may be pulled into a
building.
• Never run engine outdoors in a poorly
ventilated area where the exhaust
5

Publicidad

loading