Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP - ADD WATER TO TANK
Using the chart below, determine the level of water that is needed for
heating. Content level is the actual amount of liquid inside the bottle
or milk bag being warmed. It is NOT the size or capacity of the bottle.
Note: Warming cycle times may vary based on starting temperature, bottle size and
contents. Use the chart below as a starting point. Warming cycle time may need to
be adjusted to reach the desired temperature.
1
•
QUICK mode: BOTTLE 2-5 oz (60-150 ml)
2
•
STERILIZER mode
1
2
•
QUICK mode: BOTTLE 6-9 oz (190-290 ml)
•
STEADY mode: BOTTLE or MILK BAG 2-9 oz
•
FOOD JARS
6
2-5 oz.
6-9 oz.
2-5 oz.
6-9 oz.
Note: SILICONE BOTTLES - Use LEVEL 2 for
all content levels (2-9 oz, 60-290 ml).
(60-290 ml)
SETUP - ADD WATER TO TANK
Make sure the Bottle Warmer is
unplugged and placed on a flat,
stable, heat resistant surface.
Pour water directly into the Bottle
Warmer Tank up to the correct
level (LEVEL 1 or LEVEL 2).
Chicco Duo is a wide neck
hybrid baby bottle – glass
inside & plastic outside.
Select the Wide Neck
Plastic Bottle setting for
warming.
7
Publicidad
