Publicidad
Idiomas disponibles
Idiomas disponibles
BURNER MAINTENANCE
In most circumstances, burning
residue o after cooking will keep
burner clean.
• Be sure that the flow of combus-
tion and ventilation air is
not obstructed.
• Burner should be removed and
cleaned annually or whenever
heavy build-up or insects/insect
nests are found in order to ensure
that there is no blockage in the
burner portholes or venturi tubes.
• Use pipe cleaner to clear obstruc-
tions. A wire brush may be used
to remove corrosion from the
burner surfaces. (Please refer-
ence the Cleaning the Burner
Assembly section)
• When refitting burner, check that
the venturi tubes of the burner fit
over valve outlets.
AF TER EACH USE
PLASTIC PARTS: Wash with warm
soapy water and wipe dry.
PAINTED SURFACES: Wash
with mild detergent or nonabra-
sive cleaner and warm soapy
water. Wipe dry with soft nonabra-
sive cloth.
STAINLESS STEEL SURFACES:
To maintain appliance frame's high
quality appearance, wash with mild
detergent and warm soapy water.
Wipe dry with a soft cloth after
each use.
Care & Maintenance | Owner's Manual | Model 1860
STORAGE
• In order to extend and maintain
the life and condition of your
appliance, we strongly
recommend that the unit be
covered when left outside for any
length of time, especially during
the winter months.
• When gas supply is connected
to appliance, store appliance
outdoors in a well-ventilated
space and out of reach of children.
• Store appliance indoors ONLY if
gas supply is turned off, discon-
nected, removed from appliance
and stored outdoors.
• When removing appliance from
storage, clean burner assembly
before starting appliance. (Please
reference the Cleaning the Burner
Assembly section.)
!
WA r n I n G
A clogged burner
tube can lead to a fire
beneath the appliance.
!
C A U T I O n
DO nOT use Citrisol, abra-
sive cleaners, de-greasers or
a concentrated cleaner on
plastic parts.
Damage to and
failure of parts may result.
15
Publicidad
